Pioneer S-HF41-LR - Left / Right CH Speakers 서비스 매뉴얼
{카테고리_이름} Pioneer S-HF41-LR - Left / Right CH Speakers에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer S-HF41-LR - Left / Right CH Speakers 3 페이지. Operating instructions
Pioneer S-HF41-LR - Left / Right CH Speakers에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)
![Pioneer S-HF41-LR - Left / Right CH Speakers 서비스 매뉴얼](/uploads/products/server2/6636981/6636981.jpg)
SPEAKER SYSTEM
S-HF41-LR
65S
This service manual is intended for qualified service technicians; it is not meant for the
casual do-it-yourselfer. Qualified technicians have the necessary test equipment and
tools, and have been trained to properly and safely repair complex products such as
those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability
of the product and may void the warranty. If you are not qualified to perform the repair
of this product properly and safely, you should not risk trying to do so and refer the
repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals
which are known to the state of California to cause cancer, birth defects or other
reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
FOR PRECAUTION OF
REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by catches. Detach by pull-
ing it toward you.
The woofer is attached to the baffle by 4 external screws. To
detach it, first remove the grille. Then unfasten those screws.
When attaching it, face its terminal downward.
The mid-range is attached to the baffle by 4 external screws. To
detach it, first remove the grille. Then unfasten those screws.
When attaching it, face its terminal upward.
The tweeter is attached to the baffle by 3 external screws. When
attach it with the plus terminal on the right and the minus termi-
nal on the left.
The Network Assy is attached to the rear board by 4 external
screws. To detach it, first remove the Woofer, Mid-Range and
Tweeter. Then unfasten those screws. When attaching it, face
its plus terminal rightward.
T – ZZK AUG. 2005 Printed in Japan
ORDER NO.
RRV3238
XTW/UC