Pioneer S-X360 사용 설명서 - 페이지 7
{카테고리_이름} Pioneer S-X360에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer S-X360 35 페이지. 5.1ch surround system
Pioneer S-X360에 대해서도 마찬가지입니다: 서비스 매뉴얼 (6 페이지)
페이지 인쇄
Speaker Setup Guide
Front surround setup
This setup is ideal when rear surround speaker
placement isn't possible or you want to avoid running
long speaker cables in your listening area. Use this setup
together with the Front Surround modes in page 19 to
take advantage of wall and ceiling reflections for a very
realistic surround effect.
Surround left
Front left
Listening position
1
Connect the speaker system.
Refer to Connecting up to connect the speakers properly.
After connecting everything, place the speakers as
shown in the diagram (above) for optimal surround
sound.
The base of each surround speaker fits into the circular
groove on the top of the front speakers as shown.
2
Secure the speaker wire.
After testing for the slack necessary to turn the speaker
(see the following step), use the groove provided to
secure the speaker wire as shown. Leave 5 cm of slack
from the speaker terminals so the upper (surround)
speaker can turn freely.
Surround right
Front right
Center
Center
Receiver
subwoofer
3
Turn the surround speakers towards the closest
wall, lining the arrows up for optimal Front Surround.
Turn each surround speaker so that the
base is lined up with the
FRONT SURROUND arrow on
the front speaker. This is only necessary with the
FRTMOVIE or FRTMUSIC modes. With EXTPOWER
(Extra Power), line up the
POWER arrow (the surround speakers should be in the
same direction as the front speakers.). See Using Front
Surround on page 19 for more on this.
FRTMOVIE / FRTMUSIC
After placing the speakers, run the Auto MCACC setup
(page 16) to complete your surround sound setup.
Caution
• To prevent accidents, make sure the surround
speaker is placed securely on top of the front
speaker.
• Please don't attach the speakers to the wall or
speaker stands for Front surround setup.
arrow at the
EXTRA
arrow with the
EXTPOWER
01
7
En