Pioneer SBX-300 사용 설명서 - 페이지 13
{카테고리_이름} Pioneer SBX-300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer SBX-300 28 페이지. Speaker bar system
페이지 인쇄
Adjusting the sound
delay time
(LIP SYNC (AUDIO SYNC) )
Adjust the sound delay time to sync the sound
with the images.
The default setting is 0.
1 Press LIP SYNC for at least 3 seconds.
The unit enters lip sync adjustment mode.
2 Press VOLUME +/– to adjust the delay
time (press + to increase the delay
time).
The indicator lighting state varies depending
on the setting value.
For the indicator operation, refer to Unit
indicator operation (page 18).
3 Press LIP SYNC to end lip sync
adjustment mode.
Switching the power
to standby mode
automatically
(Auto Power Off)
The unit can be automatically switched to
standby mode when there is no signal and
30 minutes elapses without any operation
being performed.
The default setting is ON.
1 Press uSTANDBY/ON on the unit to turn
off the power.
2 Press uSTANDBY/ON for at least 3
seconds while pressing VOLUME – on the
unit.
When this is turned on, the 2 /DTS
indicator lights green.
Perform the same operation again to turn
the function off.
Enjoying music on
Bluetooth®devices
Music on Bluetooth devices such as the
following can be enjoyed wirelessly with the
unit.
• Bluetooth devices: Cell phone
• Bluetooth devices: Digital music player
• Devices without Bluetooth function: Digital
music player + Bluetooth audio transmitter
(commercially available)
Listening to music on
Bluetooth devices
Pairing the unit and the Bluetooth device
(initial registration)
Pairing is required to enjoy the music on a
Bluetooth device with the unit. Perform pairing
the first time you use a Bluetooth device or
when the pairing data has been deleted from
the Bluetooth device.
Before starting the pairing operation, check
that the Bluetooth function on the Bluetooth
device is turned on. For details, refer to the
operating instructions for the Bluetooth device.
Once the pairing operation is performed, it
does not need to be performed again.
1 Press the BT AUDIO .
The BT AUDIO indicator flashes.
2 Perform the pairing operation on the
Bluetooth device.
• When you search for the unit from the
Bluetooth device, depending on the type
of Bluetooth device, a list of connection
(waiting) devices may be shown on the
display of the Bluetooth device (the name
shown for this unit on the display will be
[SBX-300]).
• With Bluetooth version 2.0 or lower, a PIN
code needs to be entered.
– The PIN code of the unit is fixed to 0000.
3 The BT AUDIO indicator lights. Check
that pairing between the unit and
Bluetooth device was successful.
The reception range between the Bluetooth
device and unit is up to 10 m. (This value
is for use in an open space. The reception
range may vary depending on whether walls
or other structures are present.)
Note
• The pairing method may vary depending on the
type of Bluetooth device.
• When 5 minutes elapse in pairing mode, the unit
enters connection standby mode. To perform
pairing again, press BT AUDIO on the remote
control.
Operations
13
En