Pioneer VSX-S300-k 작동 지침 - 페이지 30

{카테고리_이름} Pioneer VSX-S300-k에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-S300-k 36 페이지. Audio/video multi-channel receiver
Pioneer VSX-S300-k에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (33 페이지)

페이지 인쇄

The Home Menu

The Pre Out Setting

Specify either using the surround back speaker or the front

height speaker connection with the PRE OUT SURR BACK/

FRONT HEIGHT outputs. An additional amplifier is required

for the speaker connection.

• Default setting: Surr. Back

Select 'Pre Out Setting' from the Home Menu.

Home Menu

3.Pre Out Setting

1 . Auto MCACC

Pre Out

2 . Manual SP Setup

3 . Pre Out Setting

4 . Input Assign

5 . HDMI Setup

6 . Auto Power Down

7 . FL Demo Mode

Select which speaker to connect to the PRE OUT SURR

BACK/FRONT HEIGHT outputs using /.

• Surr. Back – Connect the surround back speaker.

• Height – Connect the front height speaker.

When you're finished, press RETURN.

You return to the Home Menu.

The Input Assign menu

The composite video input terminal is assigned to ANALOG

AUX under factory settings, but this can be changed to

DIGITAL AUX or CD input.

Select 'Input Assign' from the Home Menu.

Home Menu

Surr. Back

Select 'Composite Input' from the Input Assign menu.

Return

4.Input Assign

a.Composite Input

Select the desired input option for the composite video

input terminal.

Select between ANALOG AUX, DIGITAL AUX, CD or OFF.

• Use / and ENTER to do this.

• Make sure you have connected the audio from the

component to the corresponding inputs on the rear of the

receiver.

When you're finished, press RETURN.

You return to the Input Assign menu.

1 . Auto MCACC

2 . Manual SP Setup

3 . Pre Out Setting

4 . Input Assign

5 . HDMI Setup

6 . Auto Power Down

7 . FL Demo Mode

4a.Composite Input

I n p u t

ANALOG AUX

Return

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time

has passed (when the power has been on with no operation

for several hours).

• Default setting: 6H

Select 'Auto Power Down' from the Home Menu.

Home Menu

6.Auto Power Down

1 . Auto MCACC

2 . Manual SP Setup

3 . Pre Out Setting

4 . Input Assign

5 . HDMI Setup

6 . Auto Power Down

7 . FL Demo Mode

Specify the amount of time to allow before the power

is turned off (when there has been no operation).

• You can select 2, 4 or 6 hours, or OFF (if no automatic

shutoff is desired).

When you're finished, press RETURN.

You return to the Home Menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the

front panel display.

Select 'FL Demo Mode' from the Home Menu.

Home Menu

7.FL Demo Mode

1 . Auto MCACC

FL Demo

2 . Manual SP Setup

3 . Pre Out Setting

4 . Input Assign

5 . HDMI Setup

6 . Auto Power Down

7 . FL Demo Mode

Choose ON or OFF for the demo display.

When you're finished, press RETURN.

You return to the Home Menu.

Return