Pioneer VSX-S300-k 작동 지침 - 페이지 34

{카테고리_이름} Pioneer VSX-S300-k에 대한 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer VSX-S300-k 36 페이지. Audio/video multi-channel receiver
Pioneer VSX-S300-k에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (33 페이지)

페이지 인쇄

Additional information

Can't operate the remote control.

 Replace the batteries (refer to page 8).

 Operate within 7 m, 30º of the remote sensor (refer to page 8).

 Remove the obstacle or operate from another position.

 Avoid exposing the remote sensor on the front panel to direct

light.

The display is dark or off.

 Press DIMMER repeatedly to return to the default.

The front panel display switches over for no apparent

reason to various different displays.

 This happens because the demo display is in operation. To

turn off the demo display, press any button to go back to the

original display, or set the FL Demo Mode to OFF (see The FL

Demo Mode menu on page 30).

The

Bluetooth

wireless technology device cannot be

connected or operated. Sound from the

technology device is not emitted or the sound is

interrupted.

 Check that no object that emits electromagnetic waves in the

2.4 GHz band (microwave oven, wireless LAN device or

Bluetooth wireless technology apparatus) is near the unit. If

such an object is near the unit, set the unit far from it. Or, stop

using the object emitting the electromagnetic waves.

 Check that the Bluetooth wireless technology device is not too

far from the unit and that obstructions are not set between the

Bluetooth wireless technology device and the unit. Set the

Bluetooth wireless technology device and the unit so that the

distance between them is less than about 10 m and no

obstructions exist between them.

 Check that the Bluetooth ADAPTER and the ADAPTER PORT

terminal of the unit are correctly connected.

 The Bluetooth wireless technology device may not be set to the

communication mode supporting the Bluetooth wireless

technology. Check the setting of the Bluetooth wireless

technology device.

 Check that pairing is correct. The pairing setting was deleted

from this unit or the Bluetooth wireless technology device.

Reset the pairing.

 Check that the profile is correct. Use a Bluetooth wireless

technology device that supports A2DP profile and AVRCP

profile.

HDMI

No picture or sound.

 If the problem still persists when connecting your HDMI

component directly to your monitor, please consult the

component or monitor manual or contact the manufacturer

for support.

No picture.

 Video signals that are input from the analog video terminal

will not output from the HDMI terminal. Signals that are input

from the HDMI terminal will not output from the analog video

terminal. Be consistent with the type of cable between input

and output.

 Depending in the output settings of the source component, it

may be outputting a video format that can't be displayed.

Change the output settings of the source, or connect using

Bluetooth

wireless

the composite video jacks.

 This receiver is HDCP-compatible. Check that the components

you are connecting are also HDCP-compatible. If they are not,

please connect them using the composite video jacks.

 Depending on the connected source component, it's possible

that it will not work with this receiver (even if it is HDCP-

compatible). In this case, connect using the composite video

jacks between source and receiver.

 If video images do not appear on your TV, try adjusting the

resolution, Deep Color or other setting for your component.

 To output signals in Deep Color, use an HDMI cable (High

Speed HDMI

or TV with the Deep Color feature.

The OSD screen (Home Menu, etc.) isn't displayed.

 The OSD will not appear if you have connected using the

HDMI output to your TV. Use composite connections when

setting up the system.

No sound, or sound suddenly ceases.

 Check that the Audio Parameter setting is set to HDMI AMP/

THRU (refer to page 24).

 If the component is a DVI device, use a separate connection

for the audio.

 HDMI format digital audio transmissions require a longer time

to be recognized. Due to this, interruption in the audio may

occur when switching between audio formats or beginning

playback.

Cable) to connect this receiver to a component

 Turning on/off the device connected to this unit's HDMI OUT

terminal during playback, or disconnecting/connecting the

HDMI cable during playback, may cause noise or interrupted

audio.

Synchronized operation not possible using Control with

HDMI function.

 Check the HDMI connections.

 The cable may be damaged.

 Select ON for the Control with HDMI setting (see HDMI Setup

on page 31).

 Turn the TV's power on before turning on this receiver's power.

 Set the TV side Control with HDMI setting to on (see TV's

operating instructions).

Important information regarding the HDMI

connection

There are cases where you may not be able to route HDMI

signals through this receiver (this depends on the HDMI

equipped component you are connecting-check with the

manufacturer for HDMI compatibility information).

If you aren't receiving HDMI signals properly through this

receiver (from your component), please try the following

configuration when connecting up.

Configuration

Connect your HDMI-equipped component directly to the

display using an HDMI cable. Then use the most convenient

connection (digital is recommended) for sending audio to the

receiver. See the operating instructions for more on audio

connections. Set the display volume to minimum when using

this configuration.

Note

• Depending on the component, audio output may be

limited to the number of channels available from the

connected display unit (for example audio output is

reduced to 2 channels for a monitor with stereo audio

limitations).

• If you want to switch the input source, you'll have to

switch functions on both the receiver and your display

unit.

• Since the sound is muted on the display when using the

HDMI connection, you must adjust the volume on the

display every time you switch input sources.