Pioneer XW-SMA1 사용 설명서 - 페이지 12
{카테고리_이름} Pioneer XW-SMA1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer XW-SMA1 48 페이지. Wireless sound system
Pioneer XW-SMA1에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
02
Connections
Chapter 2:
Connections
Caution
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting iPod/iPhone/iPad
It is possible to listen to audio when iPod/iPhone/iPad is
connected to this unit. Open the terminal cover (XW-SMA3
only) (page 16).
Switch the unit into standby then connect your iPod/iPhone/
iPad to the USB terminal on the rear panel of this unit.
When the unit's power is turned ON, the iPod/iPhone/iPad
connected to the unit will be charged.
When this unit is running by the built-in battery, iPod/iPhone/
iPad is not charged (XW-SMA3 only).
LAN(10/100)
iPod/iPhone/iPad
Connecting to the network through the
wired or wireless LAN
By connecting this unit to the network via the wired or
wireless LAN, you can play back audio files stored on devices
1
on the network.
Open the terminal cover (XW-SMA3 only).
Connect the LAN connector on this unit to the LAN connector
on your router (with or without the built-in DHCP server
function) with a straight LAN cable (CAT 5 or higher). Also
wireless connection to the network is possible.
Note
1 • Photo or video files cannot be played back.
• With Windows Media Player 11 or 12, you can even play back copyrighted audio files on this unit.
12
En
Turn on the DHCP server function of your router.
If your router does not have a built-in DHCP server function,
you have to set up the network manually.
See Connect to network on page 18.
Connecting using LAN cable
Connecting using wireless LAN
iPod/iPhone/iPad
LAN cable
LAN
3
(commercially
available)
PC1
LAN(10/100)
LAN
3
2
1
Router
2
1
WAN
PC2
iPod/iPhone/iPad
Router
WAN