Pioneer XW-SMA3 사용 설명서 - 페이지 38
{카테고리_이름} Pioneer XW-SMA3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer XW-SMA3 48 페이지. Wireless sound system
Pioneer XW-SMA3에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 부록 매뉴얼 (2 페이지)
페이지 인쇄
09
Additional information
Network
Problem
Cannot access to the
network.
Playback does not start.
The audio files stored on
devices on the network, such
as a PC, cannot be played
back.
Audio playback is
undesirably stopped or
disturbed.
38
En
Check
The LAN cable is not firmly
connected.
The router is not switched on.
The device is currently disconnected
from this unit or the power supply.
Windows Media Player 11 or
Windows Media Player 12 is not
currently installed on your PC.
Audio files recorded in MPEG-4 AAC
or FLAC are being played back on
Windows Media Player 11 or
Windows Media Player 12.
The device connected to the network
is not properly operated.
The device connected to the network
does not permit file sharing.
The folder stored on the device
connected to the network has been
deleted or damaged.
Network connections could be
restricted due to the computer's
network settings, security settings,
etc.
The LAN cable is currently
disconnected.
The audio file currently being played
back was not recorded in a format
playable on this unit.
There is heavy traffic on the network
with the Internet being accessed on
the same network.
There is a connection routed through
a wireless LAN on the same network.
Remedy
Firmly connect the LAN cable (page 12).
Switch on the router.
Check whether the device is properly connected to this unit or the
power supply.
Confirm that the computer has the following software installed:
Windows Media Player version 11 or 12, and server software
conforming to DLNA 1.0 or 1.5. Also be sure to set the server for
"media sharing" and "device selection."
Procedures for operating Windows Media Player differs depending
on the computer's OS and version of Windows Media Player. For
details consult the Microsoft website.
For details regarding operation of server software conforming to
DLNA 1.0 or 1.5, consult the instructions that came with your
software.
Confirm the file formats of the files you are trying to play with this
unit. Even though a file may have an extension otherwise playable
on this unit, it may not be playable or displayable due to individual
characteristics.
Audio files recorded in MPEG-4 AAC or FLAC cannot be played
back on Windows Media Player 11 or Windows Media Player 12. Try
using another server. Refer to the operation manual supplied with
your server.
Check whether the device is affected by special circumstances or
is in the sleep mode. Try rebooting the device if necessary.
Try changing the settings for the device connected to the network.
Check the folder stored on the device connected to the network.
Check the computer's network settings, security settings, etc.
Connect the LAN cable properly (page 12).
Check whether the audio file was recorded in a format supported
by this unit.
Check whether the folder has been damaged or corrupted.
Even audio files listed as playable on this unit may sometimes not
be played back or displayed (page 41).
Use 100BASE-TX to access the devices on the network.
There may be a shortage of bandwidth on the 2.4 GHz band used by
the wireless LAN. Make wired LAN connections not routed through
a wireless LAN.
Install away from any devices emitting electromagnetic waves on
the 2.4 GHz band (microwave ovens, game consoles, etc.). If this
does not solve the problem, stop using other devices that emit
electromagnetic waves.