Pioneer Elite PRO-1000HDI 사용 설명서 - 페이지 15

{카테고리_이름} Pioneer Elite PRO-1000HDI에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer Elite PRO-1000HDI 48 페이지. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Pioneer Elite PRO-1000HDI에 대해서도 마찬가지입니다: 빠른 참조 부품 목록 (12 페이지)

페이지 인쇄

1. Troubleshooting

Connection to a personal

computer

Connection method differs depending on the computer

type. When connecting, please thoroughly read the

computer's instruction manual.

Before making connections, be sure to make sure that

the personal computer's power and this unit's main

power is off.

For the PC input signals and screen sizes that this unit is

compatible with, please refer to supplement 1 (pages 39

to 40).

Connection of separate SYNC analog RGB

source

Make separate SYNC connections for a personal

computer that has RGB output separated into 5 output

signals: green, blue, red, horizontal synchronization signal,

and vertical synchronization signal.

When connecting to INPUT2

INPUT2

(ON SYNC)

(H/V SYNC)

When using INPUT2, set the impedance selector switch

to match the output impedance of the connected

computer's synchronization signal.

When the output impedance of the computer's

synchronization signal is below 75 , set this switch to

the 75

position.

On-screen setup is necessary after connection.

Please see pages 18 and 19.

2.2

Installation and Connections

When connecting to INPUT1

INPUT1

OUTPUT

ANALOG RGB

(ANALOG RGB)

Connect the cable corresponding to the shape of the

input terminal on this unit and the personal computer's

output terminal.

Secure by tightening the terminal screws on both units.

After connecting, on-screen setup is necessary.

Please see pages 18 and 19.

Note

Depending on the type of computer model being connected, a

conversion connector or adapter etc. provided with the computer

or sold separately may be necessary.

For details, please read your PC's instruction manual or consult

the maker or nearest dealer of your computer.

When connecting to OUTPUT (INPUT1)

INPUT1

OUTPUT

ANALOG RGB

(ANALOG RGB)

With this unit, it is possible to output the video signal to

an external monitor or other component from the

OUTPUT (INPUT1) terminal.

Note

A video signal will not be output from the OUTPUT (INPUT1)

terminal when the main power of this unit is off or in standby.

To an external monitor

PRO-1000HD

/ PRO-800HD