Cruza XR-300 사용자 설명서 - 페이지 7
{카테고리_이름} Cruza XR-300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cruza XR-300 13 페이지. Electric scooter
페이지 인쇄PACKAGE CONTENTS
Your Cruza XR-300 comes with the following items in the box. Please locate
all of the following:
The Cruza XR-300 Scooter
1.
2.
24V Battery Charger
3.
Tool Kit
4.
Product Handbook
5.
Seat & Seat Post
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your XR-300
Assembly
1. Carefully remove the XR-300 from the box.
2. To unfold the XR-300, begin by pressing
down on the FOLDING HANDLE with one
hand, while gently pulling up on the
handlebars with the other (Fig 1)
3. Fully extend the handlebars to their upright
position until you feel the mechanism lock
into place (Fig 2).
4. Attach the handlebars by sliding each hand
grip into the handlebar tube until the gold
locking pins snap into place. (Fig. 3) Next
tighten and fold the locking clamp down
into position. (Fig 4)
5. The BRAKE LEVER is in the down position
for shipping. Using the provided Allen
Wrench, loosen the tension bolt, and adjust
the levers to a comfortable position.
*BE CAREFUL NOT TO PULL ON THE
CABLES!
Page7