Pioneer PDP 502MX 매뉴얼 - 페이지 11

{카테고리_이름} Pioneer PDP 502MX에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDP 502MX 11 페이지. Rs-232c control for plasma display monitor, serial commands and protocol
Pioneer PDP 502MX에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 뉴스레터 (1 페이지), 뉴스레터 (1 페이지), 사용 설명서 (44 페이지)

페이지 인쇄
Pioneer PDP 502MX 매뉴얼
5.7 KEY LOCK/UNLOCK
5.7.1 Functions
The KEY LOCK function disables the remote control unit and the main unit operation panel, preventing unauthorized
persons from tampering with the unit after installation (RS-232C commands remain effective). Attempting to operate
the remote control unit or the main unit operation panel will cause "KEY LOCK" to be displayed in the upper right
corner of the screen. The unit is factory preset to KEY UNLOCK, meaning that the remote control unit and main unit
operation panel are both enabled.

5.7.2 How to switch KEY LOCK/UNLOCK

Two settings methods are available:
1) With the operating panel of the main unit (A hidden button is provided for this purpose.)
Change the setting between KEY LOCK and KEY UNLOCK using the KEY LOCK/UNLOCK button hidden between
the STANDBY/ON and INPUT buttons. Pressing the KEY LOCK/UNLOCK button while in menu mode or integrator
mode automatically places the unit in normal operating mode and at the same time invokes the KEY LOCK status.
2) Using RS-232C Commands
Issue the <AJY> command to enter RS-232C adjustment mode. Then issue the <KLY> command to invoke KEY
LOCK or the <KLN> command to invoke KEY UNLOCK.
KEY LOCK/UNLOCK
123