Pioneer PDP-501S-LR 빠른 참조 매뉴얼 - 페이지 4

{카테고리_이름} Pioneer PDP-501S-LR에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDP-501S-LR 12 페이지. Plasma display system: plasma display panel, media receiver and speakers

페이지 인쇄

4. S

ECURE THE

Follow the instructions listed below to secure the Display to a wall:

1) Remove the Securing hole-plugs from the upper

corners of the Display

2) Affix a support bolt and cable to either securing

hole on the Display

(contact your Pioneer Representative for purchase

information)

3) Fasten the end of the cable to a pillar or a wall

(some walls may require hooks sunk into an internal support

structure)

4) Repeat the process for the opposite side if needed

for additional support

Follow the instructions listed below to secure the Display to a base:

Stand with screws

Stand with clamp

* Clamps may be substituted to avoid drilling screw holes for the Display stand.

ISPLAY TO A

1) Position the Display on a base

(at least 1 person should support the Display at all times)

2) Place screws through the stand to the base*

(Set all screws in place before tightening the Display to the base)

3) Hold the Display while tightening the screws

(do not over-torque the base screws)

Page 4

Quick Start Installation Instructions

ASE AND

OR A

ALL