Pioneer PDP-503MXE 기술 매뉴얼 - 페이지 12
{카테고리_이름} Pioneer PDP-503MXE에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDP-503MXE 25 페이지. Plasma display monitor
페이지 인쇄
Controls and Connectors
Connection Panel
R
8Ω ~16Ω
SPEAKER
+
–
1
Plasma Display Section
1
SPEAKER (R) terminal
For connection of an external right speaker.
Connect a speaker whose impedance is 8 -16 Ω.
2
CONTROL IN/OUT (monaural mini jacks)
For connection of PIONEER components that bear
the Î mark. Making CONTROL connection enables
control of the main unit as a component in a
system.
(NOTE) The main unit cannot be operated by the
wired remote control RV-V107.
3
COMBINATION IN/OUT
Used when a number of sets are controlled
collectively. (See "5.6 Combination Connection")
Please use a mini DIN 6 pin cable (straight, fully
connected) available on the market as the
connecting cable.
(NOTE) It has no ABL linking function. And it is not
compatible with the RM-V4000V or other
multi-projection. It is not output when the
main power is off.
12
INPUT5
AUDIO
INPUT3 S-VIDEO
R
L
DIGITAL RGB
!
@
# $
CONTROL
COMBINATION
RS-232C
IN
OUT
IN
OUT
2
3
4
AC INLET
OFF
ON
-
=
AUDIO
INPUT4 VIDEO
OUTPUT
R
L
% ^
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
5
6
4
RS-232C
This terminal is used for adjustments by a PC (EIA-
232-F standard).
(See "5.5 RS-232C Adjustment Mode")
5
INPUT1 (mini D-sub 15 pin)
For connection of components that have RGB or
#
component
output jacks such as a personal
computer, DVD player, or external RGB decoder.
6
OUTPUT (INPUT1) (mini D-sub 15 pin)
Use the OUTPUT (INPUT1) connector to output the
video signal to an external monitor or other
component.
(NOTE) • The video signal will not be output from
the OUTPUT (INPUT1) connector when
the main power of this display is off or in
standby mode.
• When connecting the main units in a
series, please set the number that can be
connected as a total of 5 including the set
that the signal is initially input to. But a
condition for performing separate sink or
composite sink input and output is that
the sink level of the source used is at
least TTL level at 2.2kΩ terminal time.
8Ω ~16Ω
L
SPEAKER
+
–
~
INPUT2
(ON SYNC)
(H/V SYNC)
G
B
R
HD
VD
INPUT
(INPUT1/2)
75
Ô
2.2
Ω
kΩ
7
89 0
AUDIO
OUTPUT