Pioneer PDP-50MXE20-S 시작 매뉴얼 - 페이지 16
{카테고리_이름} Pioneer PDP-50MXE20-S에 대한 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDP-50MXE20-S 46 페이지. Pioneer flat panel television - plasma tv user manual
페이지 인쇄Installation and Connections
How to route cables
Speed clamps are included with this unit for bunching
cables together. Once components are connected, follow
the following steps to route cables.
1
Organize cables together using the provided
speed clamps.
Insert 1 into an appropriate hole on the rear of the
unit, then snap 2 into the back of 1 to fix the clamp.
Speed clamps are designed to be difficult to undo
once in place. Please attach carefully.
To attach the speed clamps to the main unit
Use the holes marked with the & sign as needed.
Connect the speed clamps using the 4 holes marked with "‡" below, depending on the situation.
To remove speed clamps
Using pliers, twist the clamp 90° and pull it outward.
In some cases the clamp may have deteriorated over
time and may get damaged when removed.
12
En
1
2
* As viewed from the rear of the display.
2
Bunch separated cables together and secure them
with the provided bead bands.
Do not allow excessive stress to be placed on the
ends of cables.
Note
Cables can be routed to the right or left.
* As viewed from the rear of the display.
PDP-50MXE20/PDP-50MXE20-S
PDP-60MXE20