3Com Etherlink 100 PCI 빠른 매뉴얼 - 페이지 8
{카테고리_이름} 3Com Etherlink 100 PCI에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com Etherlink 100 PCI 12 페이지. Etherlink 10/100 pci for complete pc management network interface cards
페이지 인쇄8
E
L
10/100 PCI
THER
INK
If the New Hardware Found dialog box appears:
a Select Driver from disk provided by hardware
manufacturer, and then click OK.
b Insert EtherDisk diskette 1 in drive A, make sure that
A:\ appears in the entry box, and then click OK.
c Go to step 2 when prompted for EtherDisk diskette 2.
If the Update Device Driver Wizard starts:
a Insert EtherDisk diskette 1 in drive A, and then
click Next.
Windows finds the driver and asks if you want to
use this driver.
b Click Finish, and then click OK when prompted for
EtherDisk diskette 1.
c Go to step 2 when prompted for EtherDisk diskette 2.
2 Remove EtherDisk diskette 1 from drive A, insert
EtherDisk diskette 2, and then click OK.
Files are copied.
If this is the first time that networking is being installed
on your PC, the Identification tab of the Network screen
appears. Go to step 3.
If networking has already been installed, you are
prompted for the Windows 95 CD. Go to step 4.
3 In the specified fields of the Identification tab screen,
enter the following information, and then click OK:
Computer Name — Identifies the PC on the network
for other users. This entry must be a unique name of
15 characters or fewer, containing no spaces.
Workgroup — Identifies the group (for example, your
department name) to which your PC belongs. If you
belong to a peer-to-peer network, this entry must be
exactly the same for all the PCs in your network.
Computer Description — Displays additional details to
other users on the network about this PC. For example,
you could specify that the PC has a printer attached.
Filling in this field is optional.
C
PC M
FOR
OMPLETE
NIC
Q
ANAGEMENT
S
G
UICK
UIDE