AEONTEC Smart Switch 6 매뉴얼 - 페이지 6
{카테고리_이름} AEONTEC Smart Switch 6에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEONTEC Smart Switch 6 9 페이지. Low-cost z-wave switch plugin module specifically used to enable z-wave command and control (on/off) of any plug-in too
페이지 인쇄RGB
RGB indication
RGB LED
Purple color (10%)
Green
Yellow
Red
4.3 RGB LED indication when Smart Switch is in Wireless Power level Test Mode
RGB
RGB indication
RGB LED
Blue LED fast blink
Green LED is switched to ON state
for 2 seconds
Yellow LED is switched to ON state
for 2 seconds
Red LED is switched to ON state for
2 seconds
5. Special rule of each command
5.1 Z-Wave Plus Info Report Command Class
Parameter
Z-Wave Plus Version
Role Type
Node Type
Installer Icon Type
User Icon Type
5.2 Association Command Class
T he Smart Switch supports 2 association groups and maximum 5 nodes can be added into each group.
Group
Nodes
Status
Output load is turned off.
Output load is in small wattage range.
US version
，
AU version
，
EU version
，
Output load is in big wattage range.
US version
，
AU version
，
EU version
，
Output load is in warning wattage range.
US version
，
AU version
，
EU version
，
Value
1
5 (ZWAVEPLUS_INFO_REPORT_ROLE_TYPE_SLAVE_ALWAYS_ON)
0 (ZWAVEPLUS_INFO_REPORT_NODE_TYPE_ZWAVEPLUS_NODE)
0x0700 (ICON_TYPE_GENERIC_ON_OFF_POWER_SWITCH)
0x0700 (ICON_TYPE_GENERIC_ON_OFF_POWER_SWITCH)
Send Mode
Send commands
t he range of load wattage is [0W, 800W)
the range of load wattage is [0W, 1000W)
the range of load wattage is [0W, 1500W)
t he range of load wattage is [800W, 1500W)
t he range of load wattage is [1000W, 2000W)
t he range of load wattage is [1500W, 3000W)
the range of load wattage is [1500W,
the range of load wattage is [2000W,
the range of load wattage is [3000W,
Status
Enter into the wireless power level test mode
wireless power level is good
wireless power level is acceptable but latency can occur
wireless power level is insufficient
∞
)
∞
)
∞
)