AEONTEC ZW096 매뉴얼 - 페이지 4

{카테고리_이름} AEONTEC ZW096에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEONTEC ZW096 9 페이지. Low-cost z-wave switch plugin module specifically used to enable z-wave command and control (on/off) of any plug-in too

페이지 인쇄

2. Technical Specifications

Model number: ZW096

Operating distance: Up to 500 feet/150 meters outdoors.

Input: 120V~, 60Hz. (USA Version)

230V~, 50Hz. (EU, AU, CN Version)

230V~, 60Hz. (BR version)

Output: 120V~, 60Hz, Max 15A Resistor load. (USA Version)

230V~, 50Hz, Max 13A Resistor load. (EU Version)

230V~, 50Hz, Max 10A Resistor load. (CN Version)

230V~, 50Hz, Max 10A Resistor load. (AU Version)

230V~, 60Hz, Max 10A Resistor load. (BR Version)

Operating temperature: 0

Relative humidity: 8% to 80%.

3. Familiarize yourself with your Smart Switch

3.1 Interface

4. All functions of each trigger

4.1 Function of Action Button

Trigger

Short press

1. Send non-security Node Info frame.

one time

2. Add Smart Switch into an existing z-wave network:

Insert the Smart Switch to power socket, The purple LED will blink slowly.

2. Let the primary controller into inclusion mode (If you don't know how to do this, refer to

its manual).

3. Press the Action button.

. If the inclusion success, Smart Switch LED will keep turning on. Otherwise, the LED will

still blink slowly, in which you need to repeat the process from step 2.

3. Remove Smart Switch from an existing z-wave network:

Insert the Smart Switch to power socket, The Smart Switch LED will follow the status

(on/off) of its load' power level.

2. Let the primary controller of existing Z-Wave network into remove mode (If you don't

℃

to 0 .

℃

Description