Ariston LL 64 B-S-W 사용자 설명서 - 페이지 7
{카테고리_이름} Ariston LL 64 B-S-W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston LL 64 B-S-W 37 페이지. Ariston ll 64 b na: user guide
Ariston LL 64 B-S-W에 대해서도 마찬가지입니다: 관리 및 사용 설명서 (36 페이지), 관리 및 사용 설명서 (31 페이지), 관리 및 사용 설명서 (36 페이지)
페이지 인쇄
Starting the dishwasher
Ready, steady, go!
You have loaded your dishes and you now have to set
the wash cycle. It takes just one minute to learn how
After performing all the
operations described in
the previous paragraphs
press on-off button "A":
indicator light "B" comes
on.
Selecting the wash cycle.
To select the wash cycle
press button "P". Each time
you press the button, a
beep will sound and
indicator lights "E" will light
up in sequence: choose the
cycle you deem most
suited to the type of dishes
to be washed (have a look
at the wash cycle table on
page 7). If the appliance
door is shut, press the Start
button "R" and you will hear
a beep; the cycle will start
up within a few seconds.
The dishwasher keeps you
informed.
Your dishwasher is fitted
with indicator lights (G)
which light up to indicate
the cycle phase under way.
prewash,wash,rinsing,
drying. At all times, your
dishwasher tells you which
cycle phase is under way.
Modifying a wash cycle in
progress.
If you have chosen the
wrong cycle, not to worry!
You can modify the wash
cycle in progress, if it has
only just started.
Keep the RESET button
"R" pressed for about 5
seconds: a prolonged beep
will sound, followed by
three short beeps. Indicator
light "G" will turn off and at
this stage, all the settings
will have been cancelled.
You are now free to re-set
the correct wash cycle.
You can cancel the
wash cycle in progress,
if it has only just started.
www.aristonappliances.us
You've left out a dish?
Well,
it
happens
everyone.Interrupt the
wash cycle by pressing the
ON-OFF button, insert the
dish you had forgotten
and press the ON-OFF
button again. The cycle will
start up from where you
interrupted it.
Finished?
The end of the wash cycle
is indicated by two short
beeps and the flashing of
the drying phase indicator
light.
Warning:
Press the ON-OFF button
as well, thus cutting off the
electricity supply to the
appliance., unplug the
appliance
from
the
electricity socket to cut off
the power supply; the
power supply cable should
consequently be easily
accessible.
• If accessible turn off the
water tap.
• Wait a few minutes
before
unloading
the dishes: they are very
hot! If you wait a little while,
they dry better thanks to
the steam.
Empty the lower rack
first.
If opening the
door soon
after the end
of the program, or
during it, stand away
from the dishwasher,
to avoid possible
injury from hot steam.
to
There's been a power failure?
Have you opened the
dishwasher door?
The wash cycle stops and
then restarts when the
electricity comes back on
or when you shut the door.
Everything
is
control!
ARISTON DISHWASHER - User Manual 5
Would you like to see
which settings you have
made?
At any time, when the cycle
is under way, if you press
button "P", the cycle in
progress indicator light will
under
light up for a few seconds.
Make sure the wash
cycle has ended before
removing the dishes!