Dinel GPLS-25N-1 사용 설명서 - 페이지 5

{카테고리_이름} Dinel GPLS-25N-1에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dinel GPLS-25N-1 12 페이지. Thru-wall level switches
Dinel GPLS-25N-1에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지)

페이지 인쇄

NSuiTablE raNgE OF aPPliCaTiON

The sensor also is not intended for level measurement on the gauge-pipe and the

container wall with antistatic treatment (partially electrically conductive).

rOCEdurE FOr PuT SENSOr iNTO OPEraTiON

1. i

NSTallaTiON

a) The sensor type GPLS–25N–0, which is intended to point level

detection on plastic or glass and gauge-tubes.

The sensor is fixed to the gauge

pipe or tube by means of two

plastic straps (2.5 mm width). The

cable should be vertically down-

wards oriented. The maximum wall

thickness of the tube depends on

the detected medium (see technical

data), the maximum is 8 mm.

b) The sensor type GPLS–25N–1, which is intended to thru-wall level

sensing of liquids in plastic or glass vessels with flat walls.

The sensor is installed on a clean

and degreased surface of the ve-

ssel wall. The attachment is done

by doublesides adhesive layer.

Orientation of the sensor can be

arbitrary. Maximum thickness of the

vessel wall depends on the detec-

ted medium (see technical data),

the maximum is 8 mm.

Plastic straps