Dinel ULM-53 series 매뉴얼 - 페이지 5
{카테고리_이름} Dinel ULM-53 series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dinel ULM-53 series 8 페이지. Ultrasonic level meters
Dinel ULM-53 series에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (20 페이지), 매뉴얼 (6 페이지)
페이지 인쇄
Electric connection
Connection through ISO connector
The ULM level meter with a G type cable gland are con-
nected to processing (display) units by means of a cable
with an outer diameter of 6 to 8 mm (recommended wire
cross-section 0.5 to 0.75 mm
connector with inner screw terminals, which is part of the
delivery. The connection diagram and the inner view of the
connector are shown in Figures on the right. Non-detach-
able connector IP67 with PVC cable 5 m long can be sup-
plied as an extra option.
View of the connector ISO
Connection through M12 connector
The ULM level meter with a C type cable gland are con-
nected to processing (display) units by means of a cable
with an outer diameter of 4 to 6 mm (recommended wire
cross-section 0.5 to 0.75 mm
with a moulded cable (2 or 5 m long) or via a detachable
connector socket without a cable (see accessories). In this
case connect the cable to the inner socket pins under fig-
ures on the right.
View of the connector M12
Connection via PG 11 gland
or gland for protective hoses
The ULM level meter or ULS sensor with a B or H type cable
gland are connected to processing (display) units by means
of a fixed PVC cable 5 m long. PG 11 (B) or plastic bushings
with a thread for protective hoses (H) can be used as a cable
gland. Connection diagrams are shown in Figures on the
right.
View of the cable
gland PG11
), via a detachable ISO
2
), via a connector socket
2
View of the cable gland for
protective hose
Connection diagram of the ULM level meter (variant –I)
and inside view of the connector
BN ( ) 1
mA
Connection diagram of the ULM level meter (variant –U)
BU ( ) 2
and inside view of the connector
BN ( ) 1
mA
BU ( ) 2
BN ( ) 1
mA
BU (3)
BN ( ) 1
mA
BU (3)
BN ( ) 1
BK (3)
U
BU ( ) 2
Connection diagram of the ULM level meter (variant –I)
BN ( ) 1
and inside view of the connector
BK (3)
U
BU ( ) 2
BN ( ) 1
BK (4)
U
BU (3)
BN ( ) 1
BK (4)
U
BU (3)
Connection diagram of the ULM level meter (variant –U)
and inside view of the connector
BN (1)
BK (3)
BU (2)
BN (1)
BK (3)
BU (2)
Connection diagram of the ULM level meter (variant –I)
BN (1)
and inside view of the connector
BK (4)
BU (3)
BN (1)
BK (4)
BU (3)
BN ( ) 1
mA
Connection diagram of the ULM level meter (variant –U)
BU ( ) 2
and inside view of the connector
BN ( ) 1
mA
BU ( ) 2
BN ( ) 1
mA
BU (3)
BN ( ) 1
Connection diagram of the level meter with an
mA
RS–485 output (variant –M)
BU (3)
0V (bu)
0V (bu)
+U
0V
+U
0V
+U
0 V
0V
+U
0V
+U
Uout
0V
+U
V
Uout
0 V
0V
+U
V
Uout
0V
+U
Uout
V
Uout
0V
V
+U
0V
+U
0V
+U
0V
+U
0V
+U
0V
+U
legend:
0V
BK – black WH – white
+U
BU – blue YE – yellow
BN – brown GN – green
0V
+U
0V
+U (bn)
U
(bk)
out
+U (bn)
3
4
1
+U
3
4
1
+U
ULM-53-dat-5.8