3Com EtherLink 3C905B-COMBO 빠른 매뉴얼 - 페이지 5
{카테고리_이름} 3Com EtherLink 3C905B-COMBO에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com EtherLink 3C905B-COMBO 12 페이지. Etherlink pci network interface cards
3Com EtherLink 3C905B-COMBO에 대해서도 마찬가지입니다: 빠른 매뉴얼 (15 페이지)
페이지 인쇄
Installing the NIC in the PC
5
et
te
If you are planning to install the Remote Wake-Up cable
choose an empty PCI slot that is close to the matching
Remote Wake-Up connector on the PC motherboard.
Remote Wake-Up is supported by the following NICs:
3C905C-TX-M
3C905B-TX
3C905B-TX-M
3C905B-COMBO
3C905B-FX
3C900B-FL
If you have a 3C905C-TX-M NIC and your PC is compliant
with PCI 2.2, Remote Wake-Up is automatically enabled
through the PCI bus. The Remote Wake-Up cable is
not required.
Carefully insert the NIC in the PCI slot.
Figure 1 Installing the NIC
1 Remove slot cover
i
7 2 Insert NIC
y
er
-
PCI slots