3Com Etherlink 3C905B-TX 빠른 매뉴얼 - 페이지 4

{카테고리_이름} 3Com Etherlink 3C905B-TX에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com Etherlink 3C905B-TX 12 페이지. Etherlink pci network interface cards
3Com Etherlink 3C905B-TX에 대해서도 마찬가지입니다: 빠른 매뉴얼 (15 페이지), 빠른 매뉴얼 (12 페이지)

페이지 인쇄

AST

THER

The 3Com Remote Wake-Up NIC (3C905B-TX), shown

in Figure 1, operates as a Wake-Up NIC only in PCs

with a Remote Wake-Up connector attached to the PC

motherboard. This NIC provides a network connection with

or without the Remote Wake-Up connector installed.

The 3C905B-TX-NM NIC does not have the Remote Wake-Up

connector or functionality.

Unless speciﬁcally indicated, the name 3C905B-TX is used

throughout this guide to refer to both NICs.

Installing the 3C905B-TX NIC

Your PC or server must have:

Make sure that you are running the latest BIOS for your

PC or server even if your PC is new. Contact your PC

manufacturer for more information.

CAUTION: Before handling the NIC, touch the unpainted

part of the metal chassis of your PC. Maintain grounding

by wearing a wrist strap attached to the chassis. Handle

the NIC by its backplate and top edge. Do not touch the

edge connector.

Follow these steps to install the 3C905B-TX NIC:

1 Open the shipping container and inspect each item

for damage.

2 Remove all jewelry from your hands and wrists.

Use only insulated or nonconducting tools.

3 Unplug the PC and disconnect all cables from the PC.

4 Remove the PC cover.

5 Choose an empty bus mastering PCI slot.

A sample PCI slot is shown in Figure 2. If you do not know

how to identify a PCI slot, check your PC documentation or

ask your system administrator.

XL PCI 10/100BASE-TX NIC Q

INK

An 80386, 80486, Pentium, or Alpha processor

An available bus mastering PCI slot

A minimum of 640K of memory

EtherDisk diskettes that shipped with the NIC

UICK

UIDE