Ariston AURES EASY 2.4 조립 및 작동 지침 매뉴얼 - 페이지 6

{카테고리_이름} Ariston AURES EASY 2.4에 대한 조립 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston AURES EASY 2.4 28 페이지. Instantaneous electric water heater

4. Insert the cable through channel ' A ' (Fig 4) for side entry, after breaking plastic wall and clean

burrs.

5. Connect the cable to terminal block and fully tighten them as follow.

BROWN or RED for LIVE (L)

BLUE or BLACK for NEUTRAL(N)

GREEN or GREEN/YEOLLOW for EARTH(E)

6. Make sure the wiring connection is tight, then close the front cover.

7. Fix back the screw A.

OPERATING INSTRUCTIONS

TO TAKE THE SHOWER FOR THE USER

IMPORTANT!

THE HEATER TANK MUST BE FILLED UP WITH WATER BEFORE TURN ON THE ELECTRIC SUPPLY THIS

IS TO PREVENT ANY DRY BURNT DAMAGE TO THE HEATING ELEMENT.

SHOULD TURN OFF THE HEATER BEFORE TURN OFF THE Product water supply valve.

Starting

1. Turn on the main product water supply valve.

2. Switch on the electric supply on the main switch out of the shower

3. Turn on the product water supply valve on the product to clockwise until the water flow through

the shower head.

4. Rotate the control knob, the HEATING led will light up and hot water will start flowing from the

shower head.

5. Adjust the shower condition setting by:

a. Rotate the control knob in clockwise to increase the temperature or in anticlockwise to de-

crease the temperature;

b. Turn the product water supply valve in clockwise to increase the water flow decreasing the

outlet water temperature or turn it in anticlockwise to decrease water flow increasing the

outlet water temperature;

c. In rare case if inlet water is too cold, both options can be not enough to reach the desired

shower conditions.

6. Temperature adjustment (fig. 2)

There are a total of 3 different levels of power consumption, the higher number means more

power being consumed and higher outlet temperature. Rotate the knob to

heater and the water temperature remains at inlet temperature. The outlet temperature might

be unstable some external factors (i.e. Inlet temperature, Inlet water flow, inlet water pressure,

voltage, electricity fluctuation) change suddenly.

7. Select the preferred shower jet thanks to spray position lever on the shower head (for model with

3 spray shower head).

to turn off the