Ariston AURES EASY 3.5 조립 및 작동 지침 매뉴얼 - 페이지 21

{카테고리_이름} Ariston AURES EASY 3.5에 대한 조립 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston AURES EASY 3.5 28 페이지. Instantaneous electric water heater

PUMP FUNCTIONING

(only for pump version models)

The pump has to be activated by pump switch on the side of the product (fig: 6). The pump starts to

work when the user turns on the product water supply valve and pump switch is ON.

MAINTENANCE

ELCB TEST

To make sure ELCB function is working properly, it is recommended to repeat this procedure at least

once a month.

After turn on the electricity and water supply:

1. Press the "TEST" button

2. Red RESET handle will drop out

3. Push up the "RESET" handle if it is down to resume back the power supply

If the RESET handle does not drop out or cannot be pushed up or if it soon slides down during the

operation, the user has to switches off the main supply and contact the service agent for repair.

NEVER try to repair the unit by yourself

If the reset handle does not drop out after pressing the "ELCB" button, switch off the main power

supply and contact your sales agent for repair. NEVER try to repair the unit by yourself

NOTA: TESTING THE ELCB REGULARLY

Cleaning precaution

Do not use thinner, alcohol, petrol or any other organic solution to clean the set, use only a damp

cloth with mild detergent.

Cleaning the filter regularly

There are two filters located at the water supply valve, one is mesh filter (installed at the incoming

water supply); the other one is the built-in filter as shown in fig.5.

Clean the two filters regularly to prevent blockage. Remove the built-in filter by turning it anti clock-

wise as shown in fig.5 B1. Take out the filter and flush it with water to remove any trapped sedi-

ments, as shown in fig.5 B2 - B3.

Note: the specification, actual product's cosmetic design and accessories parts shown are correct at

the time of printing and may be subjected to change without prior notice.