Ariston AURES S 3.5 SH PL 매뉴얼 - 페이지 4
{카테고리_이름} Ariston AURES S 3.5 SH PL에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston AURES S 3.5 SH PL 44 페이지. Instantaneous electric water heater
페이지 인쇄
EN
TECHNICAL CHARACTERISTICS
Power
Voltage
Phases
Installation
Construction
Model
Frequency
Electric current
Water Protection
Pipe Connection
Minimum Water Pressure
Qelec (kwh)
Load Pro le
Lwa (dB)
ηwh
Rated Volume (l)
Weight
Dimensions
The product should be connected only to a supply with the relevant system
impedance no more than 0.237 ohm.
Restrictions to connection may be imposed by the supply authority on the use of
equipment in the actual relevant system impedance at the interface point on the
user's premise exceeds 0.237 ohm.
This appliance is conforming with the international electrical safety standards IEC
60335-1 and IEC 60335-2-35. When present, The CE marking of the appliances
essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-35, EN 60529, EN 62233, EN
50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3, EN 61000-3-11 and EN 61000-3-12.
- ERP Energy related Products: Eu812, Eu814, EN50193-1-2013
PRODUCT INFORMATION
3.5kW
220
Mono
Refer to name plate
50/60 Hz
15.9 A
2.119
XXS
0,35 l
1,350 g
183 x 290 x113 mm
4
3.5-4.1kW
220-240
Mono
Over sink
Open Outlet
50/60 Hz
17.1 A
IP25
1/2" BSP
20 kPa (0.2 bar)
2.119
XXS
15 dB
40%
0,35 l
1,350 g
5.5-6.5KW
220-240
Mono
50/60 Hz
27.1 A
2.119
XXS
0,35 l
1,350 g