Ariston AXIOS LUX ECO 사용 설명서 - 페이지 5

{카테고리_이름} Ariston AXIOS LUX ECO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston AXIOS LUX ECO 10 페이지.

Set Local time

When the unit is first switched on, the device will automatically require the setting

of the current time. To adjust the time, press the "SET" button for 2 seconds. Set

the hour by using the "+" and "-" buttons and confirm by pressing the button

"SET". Repeat the operation to set the minutes.

If the power supply is removed from the product or in case of a power failure,

depending on its duration, time needs to be re-set.

User Menu

To access the User Menu press "+" and "-" buttons simultaneously for 3 seconds.

Scroll through the different options using "+" and "-" buttons and then "SET" to

confirm the selection. The options are:

U01  Anti-Legionella (Thermal Disinfection Cycle)

2. U02  Setting max temperature

The "U" letter will be fixed, while the number of the relative option will blink

(Fig.8).

1. U01 - Anti-legionella mode: Activating the "thermal

disinfection cycle"

It is a water heating cycle at 60°C for 60 minutes, in order to kill the relevant

bacteria. This mode is activated by default (factory setting), but the cycle will start

automatically only if the default temperature (65°C) is changed below 60°C. Once

the disinfection cycle has started, it will repeat every 30 days if the water

temperature never reaches 60°C during that period. If the power supply is removed

from the product or in case of a power failure, depending on its duration and on the

pre-set temperature, the disinfection cycle will re-start. At the end of each cycle,

the operating temperature returns to the previously set temperature by the user.

When the disinfection cycle is active, the display alternates between the water

temperature and the "-Ab-" sign. (Fig. 9).

Fig.8

- 4 -