Ariston CONTRACT STD 100 설치 설명서 지침 - 페이지 3
{카테고리_이름} Ariston CONTRACT STD 100에 대한 설치 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston CONTRACT STD 100 24 페이지. Unvented hot water storage cylinders
Ariston CONTRACT STD 100에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)
페이지 인쇄
1.
GENERAL
INFORMATION
1.2
D
ELIVERY
This manual is an integral and essential part of the product. It should be kept
with the appliance so that it can be consulted by the user and our authorised
personnel.
Please read carefully the instructions and notices about the appliance
contained in this manual, as they provide important information regarding the
safe installation, use and maintenance of the cylinder.
Failure to do so may invalidate the guarantee.
The range is available with the following options:
The Wall-hung range (50, 75, 100 litre models), which are supplied as the
following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve,
immersion heater and thermostat with thermal cut-out.
One small box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve, tundish).
The Ariston Contract and the Ariston Comfort (indirect only) floor-standing
range (125, 150, 200 and 300 litre models).
The Contract is supplied with the following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve.
2) Immersion heater(s) and thermostat(s) with thermal cut-out(s) (not fitted).
3) Cylinder thermostat with thermal cut-out (indirect only).
4) Feet x 3.
One small box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve, tundish) and separate motorised valve (indirect only).
The Comfort is supplied with the following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve.
2) Factory fitted immersion heater and thermostat with thermal cut-out (dry
pocket).
3) Factory fitted cylinder thermostat with thermal cut-out.
4) Feet x 3.
One small box containing;
1) Unvented control pack (expansion vessel, 2 piece cold water combination
valve, tundish) and separate motorised valve.
The High Capacity floor-standing range (500 litre models), which are
supplied as the following;
One large box containing;
1) The cylinder with factory fitted temperature & pressure relief valve,
immersion heater and thermostat with thermal cut-out.
2) Cylinder thermostat with thermal cut-ou (indirect only).
3) Feet x 3.
One small box containing;
1) Unvented control pack (expansion vessel, cold water combination valve,
tundish) and separate motorised valve (indirect only).
3