Aeotec Siren 6 사용자 설명서 - 페이지 4
{카테고리_이름} Aeotec Siren 6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Siren 6 6 페이지. Indoor siren
Aeotec Siren 6에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (10 페이지)
페이지 인쇄
1. Affix Siren 6 Wall Mount Plate in any desired location near an outlet.
a. Use 3x 20mm screws or double-sided tape.
b. Lock the Siren 6 into place where the mount is installed.
Pairing your Siren 6 into your existing Z-Wave network.
1. Power Siren 6 through the provided power adapter.
2. Ensure that Siren 6 LED is blinking slowly.
3. Set your Z-Wave gateway into pair / add device mode. (Refer to your Z-Wave gateway/controller instruction
manual on how to set it into pair mode).
4. Tap the Siren 6 Action Button once. (If your gateway supports S2 encryption, enter the first 5 digits of the DSK
into your Z-Wave gateway interface to complete S2 encrypted pairing, DSK is printed on the Siren 6 unit).
5. If Siren 6 has successfully paired to your Z-Wave gateway, the LED on Siren 6 will emit a solid color for 30
seconds, then turn off. If in the case that the Siren 6 failed to pair, LED will continue to blink slowly.
With your Siren now working as a part of your smart home, you'll be able to configure it from your home control
software. Please refer to your software's user guide for precise instructions on configuring Siren to your needs.