Aeotec Siren 6 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Aeotec Siren 6에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Siren 6 10 페이지. Indoor siren
Aeotec Siren 6에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지), 빠른 시작 매뉴얼 (7 페이지)
페이지 인쇄
29-9-2020
Parameter 51: Report which Buttons had been paired (Read Only)
Once Unpairing or Pairing Button Mode finishes, node will automatically send this configuration report via Lifeline to inform which Buttons had been paired. This
parameter does not restore to the default value when Siren is removed from the network or reset the factory settings.
Size: 1 Byte, Default Value: 0
Setting
0
1
2
3
4
5
6
7
Parameter 52: Get the information of #1 Button (Read Only)
This parameter does not restore to the default value when Sirene is removed from the network or reset the factory settings.
Size: 4 Byte, Default Value: 0
Setting
0
1 - 2147483647
Parameter 53: Get the information of #2 Button (Read Only)
This parameter does not restore to the default value when Siren is removed from the network or reset the factory settings.
Size: 4 Byte, Default Value: 0
Setting
0
1 - 134217727
Parameter 54: Get the information of #3 Button (Read Only)
This parameter does not restore to the default value when Siren is removed from the network or reset the factory settings.
Size: 4 Byte, Default Value: 0
Setting
0
1 - 2147483647
Parameter 96: Enable or Disable the ability that click the Action Button to stop a playing tone.
Size: 1 Byte, Default Value: 0
Setting
0
1
Parameter 255: Factory Reset or Initialization (Write Only)
Parameter 51/52/53/54 will not restore the configuration settings to the default when Factory Reset or Initialization is performed.
Size: 4 Byte, Default Value: 0
Setting
0
1431655765
Technical Data
manual.zwave.eu/backend/make.php?lang=en&sku=AEOEZW164
manual.zwave.eu/backend/make.php?lang=en&sku=AEOEZW164
Description
There is no paired Button.
#1 Button had been paired.
#2 Button had been paired.
#2 and #1 Button had been paired.
#3 Button had been paired.
#3 and #1 Button had been paired.
#3 and #2 Button had been paired.
#3, #2 and #1 Button had been paired.
Description
#1 Button is unpaired.
Information about #1 Button, including battery voltage (unit is mV) and software version.
Description
#2 Button is unpaired.
Information about #2 Button, including battery voltage (unit is mV) and software version.
Description
#3 Button is unpaired.
Information about #3 Button, including battery voltage (unit is mV) and software version.
Description
Disable
Enable
Description
Initialization: Initialize all configuration parameters to default values.
Factory Reset: Restore the product to factory settings and remove from the network.
8/10