Ariston HW80/9H 사용 설명서 - 페이지 13

{카테고리_이름} Ariston HW80/9H에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston HW80/9H 39 페이지.

Note: Before turning on the power switch, make sure the product is kept standby for at least 30

minutes, the tank is completely filled with water and the whole system is free from leakage.

5.2 Leakage Protection Special Plug Instruction

Make sure the tank is completely filled with water and the system is free from leakage, and then put

the leakage protection special plug into the outlet:

5.2.1 Press "Reset" button and "Safety Guardian" indicator lights up; then press "Leakage

Inspection" button to turn off the power and "Safety Guardian" indicator dies out; and again, press

"Reset" button and "Safety Guardian" indicator lights up, now the product is ready for operation.

5.2.2 If it's not reset after pressing "Reset" button and "Safety Guardian" indicator does not light up,

then you should contact Ariston customer service to run system inspection; if the product is not

correctly grounded then "Incorrect Grounding Protection" indicator will light up and keep active

until being disconnected. Then leakage protection function is activated to cut the power and

extinguish "Safety Guardian" indicator. Now, you should stop using this product, remove the plug or

disconnect any power supply and contact manufacture's maintenance staff to resolve any possible

malfunction.

5.2.3 User should regularly inspect the product following the process of 5.2.1. If leakage protection

special plug accidentally cuts off the power when the product is running, please perform the test

following the process of 5.2.1 and continue to use the product if no problem is found.