Aeotec Water Sensor 7 Pro 사용자 설명서 - 페이지 4
{카테고리_이름} Aeotec Water Sensor 7 Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Water Sensor 7 Pro 9 페이지. Water sensor
Aeotec Water Sensor 7 Pro에 대해서도 마찬가지입니다: 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (9 페이지)
페이지 인쇄
Functions of Water Sensor 7 Pro.
Water leak
Once installed, this sensor will report wet or dry via Notification Command Class when this devices is wet or removed
from water.
Notification Report
Type: Unknown (0x05)
Value: Wet (0x02) or Dry (0x00)
Tamper
Tamper alarm will be sent if the cover is removed.
Notification Report
Type: Tamper Removed (0x07)
Value: 0x03
Temperature
This sensor will report occasionally on its own as an unsolicited Multilevel Sensor Report either by a timed interval
(Parameter 18) or by the change in value (Parameter 16).
Multilevel Sensor Report
Humidity
This sensor will report occasionally on its own as an unsolicited Multilevel Sensor Report either by a timed interval
(Parameter 18) or by the change in value (Parameter 17).
Multilevel Sensor Report
LED indicator.
Function Description
Device Not in Network
Include/Exclude/Learn Mode
Local Reset
LowBatt
LED Indicator
Blinks red for 5 seconds (1 sec duty cycle) when battery is
inserted and sensor is not in network
Illuminate green for 3 seconds when Inclusion / Exclusion /
Configuration is successful.
Illuminate red for 3 seconds when Inclusion / Exclusion /
Configuration is unsuccessful (upon a timeout of 30 seconds).
When device is locally reset to Factory Default LED blinks red (1
second duty cycle) for 5 seconds.
When operation button is Short Pressed the LED blinks red three
time (1 sec duty cycle)