Ariston NUOS FSi 250 설치 및 서비스 지침 - 페이지 11

{카테고리_이름} Ariston NUOS FSi 250에 대한 설치 및 서비스 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston NUOS FSi 250 44 페이지. External air source heat pump water heater

USER INSTRUCTIONS

3.1 C

ONTROL

ANEL

. 3.1

ONTROL

For Installer Menu operation refer

to 4.1.

ANEL

ON/OFF Button

Press to turn NUOS ON.

Press again to turn OFF.

Mode Button

Press to select mode either Auto, Boost and Green, Voyage, P1,P2 or

P1+P2 (if enabled).

Also press to exit from installer and information menus.

Control Knob - User

Turn knob clockwise to increase to desired set temperature.

Turn knob anticlockwise to decrease to desired set temperature.

Press and release knob and the current temperature of the water within

the tank will be displayed for 5 seconds.

Control Knob - Information Menu

Press and hold the knob for 5 seconds to display Information Menu.

Turn knob clockwise / anticlockwise to scroll through information

parameters L0 to L14.

Press knob at selected parameter and it's current value will be displayed.

Press knob again (or mode button) to return to Information menu.

IMPORTANT

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use

of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not

play with the appliance.

Once the NUOS unit has been fully commissioned, the

installer must give full guidance of use to the end user.

set

AUTO