Ariston PRIMO HE ITD 125 설치 및 사용 설명서 지침 - 페이지 3

{카테고리_이름} Ariston PRIMO HE ITD 125에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston PRIMO HE ITD 125 24 페이지. Unvented hot water storage cylinders
Ariston PRIMO HE ITD 125에 대해서도 마찬가지입니다: 설치, 서비스 및 운영 지침 (34 페이지)

페이지 인쇄

www.tradeplumbing.co.uk Call Sales On 08708034288

GENERAL

INFORMATION

1.2

ELIVERY

www.tradeplumbing.co.uk Call Sales On 08708034288

This manual is an integral and essential part of the product. It should be kept

with the appliance so that it can be consulted by the user and our authorised

personnel.

Please read carefully the instructions and notices about the appliance

contained in this manual, as they provide important information regarding the

safe installation, use and maintenance of the cylinder.

Failure to do so may invalidate the guarantee.

The Ariston range is available in the following options:

The Wall-hung ProTech range (50, 75, 100 litre models), which are supplied

as follows;

One box containing;

1) The cylinder with factory fitted temperature & pressure relief valve,

immersion heater and thermostat with thermal cut-out.

One box containing;

1) Unvented control pack (expansion vessel, 2 piece cold water combination

valve and tundish), instructions for installation, servicing and use and the

Benchmark Log Book).

The Contract ProTech floor-standing range (100, 125, 150, 200 and 300 litre

models), which are supplied as follows;

One box containing;

1) The cylinder with factory fitted temperature & pressure relief valve.

One box containing;

1) Unvented control pack (expansion vessel, 2 piece cold water combination

valve and tundish), motorised valve (indirect only). Immersion heater(s)

and thermostat(s) with thermal cut-out(s), cylinder thermostat with

thermal cut-out (indirect only), feet (x3), instructions for installation,

servicing and use and the Benchmark Log Book.

The High Capacity ProTech floor-standing range (500 litre models), which

are supplied as follows;

One box containing;

1) The cylinder with factory fitted temperature & pressure relief valve.

1) Unvented control pack (expansion vessel, 2 piece cold water combination

valve and tundish), motorised valve (indirect only). Immersion heater(s)

and thermostat(s) with thermal cut-out(s), cylinder thermostat with

thermal cut-out (indirect only), feet (x 3), instructions for installation,

servicing and use and the Benchmark Log Book.

The Classico and Primo floor-standing ranges (125, 150, 200 and 300 litre

models).

Are supplied with the following;

One box containing;

1) The cylinder with factory fitted temperature & pressure relief valve.

One box containing;

1) Unvented control pack (expansion vessel, 2 piece cold water combination

valve and tundish), motorised valve (indirect only). Immersion heater(s)

and thermostat(s) with thermal cut-out(s), cylinder thermostat with

thermal cut-out (indirect only), feet (x3), instructions for installation,

servicing and use and the Benchmark Log Book.