Aeotec Dual Nano Switch ZW132 사용자 설명서 - 페이지 9

{카테고리_이름} Aeotec Dual Nano Switch ZW132에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Dual Nano Switch ZW132 15 페이지.

8-7-2019

Note: This is the physical connection diagram for 120/230VAC power input.

1. Mounting the gang box.

2. Position all wires to provide room for the device. Place the Dual Nano Switch inside the gang box towards the back of the box.

3. Position the antenna towards the back of the box, away from all other wiring.

4. Reinstall the Dual Nano Switch to the gang box.

5. Reinstall the cover onto the gang box.

Note: 1. The gang box should be sized 3×2×2.75 inch / 75×50×70 mm or larger, minimum volume 14 in / 230cm .

2. Use flexible copper conductors only.

5. Restore Power.

Restore power at the circuit breaker or fuse.

https://aeotec.freshdesk.com/support/solutions/articles/6000178928-dual-nano-switch-user-guide-zw132-and-zw140-

Dual Nano Switch user guide : Aeotec Group

9/15