Ariston 41-116-36 사용자 설명서 - 페이지 7

{카테고리_이름} Ariston 41-116-36에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston 41-116-36 12 페이지. Condensing wall-hung gas boiler

COMFORT / AUTO Function

To activate the Comfort function or AUTO function it is necessary

to press the button 5

COMFORT function (CLAS HE EVO models)

The comfort mode has priority over any other heating request.

There are two settings for the comfort mode (they can be adjusted

in the parameters menu):

1. As soon as DHW is drawn, the secondary heat exchanger is kept

warm for 30 mins.

2. As soon as DHW is drawn, the secondary heat exchanger is kept

warm permanently.

This function may be enabled by pressing the COMFORT button.

Note

Esc, Ok and Encoder

The Esc, Ok and Encoder are reserved for use by the service

technician.

If one of these buttons/knobs are activated by accident by the end

user 'SERV' is displayed

This will deactivate after a few seconds.

All other button are reserved for use by the end user

Auto button - Temperature adjustment activation

The AUTO function enables boiler operation to be adapted to

environmental conditions and to the type of system it is installed

on.

Comfortable temperature is reached inside the room in the quickest

way possible, without wasting money, energy or effi ciency, while

substantially reducing the amount of wear experienced by the

components.

Your installer will advise you on the devices connectable to the

boiler and will program it according to the system.

In normal boilers the water temperature inside the heating

elements is usually set to a high value (70-80°C), thereby ensuring

eff ective heating during the few really cold winter days. It then

becomes excessive on less cold days (of which there are many)

more typical of the autumn and winter seasons. This leads to

excessive room heating after the thermostat has been switched off ,

resulting in energy waste and uncomfortable conditions inside the

room.

The AUTO function "takes control" of the boiler and selects the best

operating regime based on environmental conditions, external

devices connected to the boiler and the performance required. It

constantly decides at which power level to operate based on the

environmental conditions and the room temperature required.

user's manual