Ariston 47-116-10 설치 및 서비스 지침 - 페이지 29

{카테고리_이름} Ariston 47-116-10에 대한 설치 및 서비스 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston 47-116-10 49 페이지. Aco series

. 3.11

. 3.12

. 3.13

. 3.14

. 3.15

Soft light adjustment 1 1

The soft light can be adjusted between the maximum power

(shown on the display as "00", i.e. 100%) and the minimum

power (shown on the display as "01", i.e. 1%). The boiler is

factory set to a value which is suitable for the ignition with any

type of gas (approx. 33%).

The value set expressed as a percentage, can be displayed and

adjusted as indicated in Section 3.6.1 (parameter 1)

Maximun Heating Power adjustment 2 2

The maximum heating power can be adjusted to between the

maximum power allowed by the boiler (24kW) and the minimum

power (8kW). The value is factory set to 70% of the maximum

power.

The value set (expressed as a percentage) canbe displayed and

modified as illustrated in Section 3.6.1 (parameter 2).

The display shows the value between 100% ("00" on the display)

and 1% ("01") of this interval.

Display

Ignition Delay adjustment

The ignition delay can be adjusted to between 0 and 7

minutes. The delay is factory set to 2 minutes.

The value set can be displayed and modified as illustrated in

Section 3.6.1 (parameter 3)

Maximun Central Heating temperature

This parameter allows the setting of the maximum temperature for

the central heating circuit. The value is factory set at 82°C and

can be adjusted as illustrated in Section 3.6.1 (parameter 4).

Minimum Central Heating temperature

This parameter allows the setting of the minimum temperature for

the central heating circuit. The value is factory set at 42°C and

can be adjusted as illustrated in Section 3.6.1 (parameter 5).

3 3

4 4

5 5