Aeotec Smart Switch 6 사용자 설명서 - 페이지 7

{카테고리_이름} Aeotec Smart Switch 6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Smart Switch 6 12 페이지.
Aeotec Smart Switch 6에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)

If you're using a Z-Stick:

1. If your Z-Stick is plugged into a gateway or a computer, unplug it.

2. Take your Z-Stick to your Smart Switch.

3. Press the Action Button on your Z-Stick.

4. Press the Action Button on your Smart Switch.

5. If your Smart Switch has been successfully removed from your network, its RGB

LED will remain colourful gradient status. If the removal was unsuccessful, the RGB

LED will still be solid (Energy mode state when the output is on or Night light mode

state when the output load is off), repeat the instructions from step 3.

6. Press the Action Button on the Z-Stick to take it out of removal mode.

If you're using a Minimote: