Ariston ecoGENUS 24 RFFI 서비스 지침 - 페이지 3

{카테고리_이름} Ariston ecoGENUS 24 RFFI에 대한 서비스 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston ecoGENUS 24 RFFI 32 페이지. Condensing type c boilers
Ariston ecoGENUS 24 RFFI에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지)

페이지 인쇄

1. Electrical Diagrams

SERVICING

INSTRUCTIONS

1.1

EPLACEMENT

ARTS

1.2

AIN

ENERAL

CCESS

. 1.1

To ensure efficient safe operation, it is recommended that the boiler is

serviced annually by a competent person.

Before starting any servicing work, ensure both the gas and electrical

supplies to the boiler are isolated and the boiler is cool.

Before and after servicing, a combustion analysis should be made via the flue

sampling point (please refer to the Installation Manual for further details).

After servicing, preliminary electrical system checks must be carried out to

ensure electrical safety (i.e. polarity, earth continuity, resistance to earth and

short circuit).

The life of individual components vary and they will need servicing or

replacing as and when faults develop.

The fault finding sequence chart in chapter 2 will help to locate which

component is the cause of any malfunction, and instructions for removal,

inspection and replacement of the individual parts are given in the following

pages.

All testing and maintenance operations on the boiler require the control panel

to be lowered. This will also require the removal of the casing.

To lower the control panel and dismantle the front part of the casing,

proceed as follows:

1. Unscrew screws "A" (1/4 turn only) (F

control panel forward;

2. Unscrew the screws "B" (F

. 1.3) and unhook the front panel by lifting it.

. 1.2

. 1.1 + F

. 1.2) and rotate the

. 1.3