Dini Argeo DGT4XPRONET 빠른 시작 매뉴얼 - 페이지 13
{카테고리_이름} Dini Argeo DGT4XPRONET에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dini Argeo DGT4XPRONET 17 페이지. Digital weight transmitter with 4 channels
페이지 인쇄
16.3 MODBUS REGISTERS FOR COMMAND SENDING
Data
Register
Command
40001
40002
Parameter 1
40003
40004
Parameter 2
40005
EXAMPLE 1
For zeroing the weight on the scale:
2. Set the command in byte 2
Byte Value
1
00 Hex
2
01 Hex
This manual contains the main registers for reading data / sending commands.
Refer to the Modbus protocol manual for the complete list of available registers.
DESCRIPTION
Main available commands:
Value
Command
00 Hex
No command
01 Hex
Scale zeroing
02 Hex
Tare
03 Hex
Preset Tare
0A Hex
Setpoint 1 setting
0B Hex
Setpoint 2 setting
19 Hex
Digital output setting
22 Hex
Reboot the weight transmitter
First parameter of the command.
Parameter is always expressed in absolute mode (no decimals, no sign).
Second parameter of the command.
Parameter is always expressed in absolute mode (no decimals, no sign).
EXAMPLE 2
For setting a preset tare of 1000 kg:
1. Set the tare value in parameter 1 (byte 3, 4, 5, 6)
2. Set the command in byte 2
Byte Value
1
00 Hex
2
03 Hex
3
00 Hex
(MSB)
4
00 Hex
5
03 Hex
6
E8 Hex
(LSB)