Ariston GENUS 27 사용자 설명서 - 페이지 12
{카테고리_이름} Ariston GENUS 27에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston GENUS 27 20 페이지.
![Ariston GENUS 27 사용자 설명서](/uploads/products/server2/672853/672853.png)
The colon now blinks once a second.
AM/PM TIME DISPLAY
If you press the "+/-h" and "h" keys at the same time, the time display
switches into the AM/PM mode.
Notes: If you keep the "h" and "m" keys pressed down for more than 2
seconds, the display will enter fast forward scroll mode.
‹ ENTERING THE SWITCHING TIMES
If your entry is incomplete, the segments not yet
selected will blink in the display.
You have 20 memory locations available. Each
switching time takes up one memory location.
Keep pressing the "Prog" key until a free memory
location is shown in the display "-- : --".
Program ON or OFF with the "
"
" = ON - "
" = OFF.
Enter the hour using "h"; enter the minutes using "m".
If a switching command is to be carried out every day (1 2 3 4 5 6 7) then
store using the "
" key, otherwise select the days it is to be carried out
on by using the "Day" key.
When the day selection is left blank, the programmed switching instruction
12
operates at the same time every day.
1 2 3 4 5 6 7
1 2 3 4 5 6
1 2 3 4 5
1 2 3 4 5
1
.....
7
Store using the "
programming. The time switch enters the automatic operating mode and
displays the current time of day. Begin any further entry of a switching time
" key:
with the "Prog" switch.
If necessary, once you have finished programming and have returned to the
current time display, by pressing the "
automatically switch to the current programmed status until the next timed
setting. You can put the timer into the correct mode with the "
Monday ..... Sunday
Monday ..... Saturday
Monday ..... Friday
6 7
Saturday ..... Sunday
Monday
(selection of single days)
Sunday
" key or push "Prog" key if you are going to continue
" button, the timer will not
" key.
B003