Ariston Genus 27 Plus 사용자 설명서 - 페이지 9

{카테고리_이름} Ariston Genus 27 Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston Genus 27 Plus 12 페이지. Type c boiler
Ariston Genus 27 Plus에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (24 페이지)

페이지 인쇄

403

Reading the programmed switching times

Pressing the "Prog" key displays the programmed switching times until the

first free memory location appears in the display "– – : – –".

If you now press the "Prog" key once again, the number of free memory

Iocations will be displayed, e.g. "FR 1 1 8 8 ". If all memory locations are

occupied, the display "FR 0 0 0 0 " appears.

Changing the programmed switching times

Press the "Prog" key repeatedly until the switching time you want to change

is displayed. You can now enter the new data. See point "Entering the

switching times".

Notes on storing switching times:

If you end your entry of the switching times by pressing the "Prog" key, then

the switching time you have entered will be stored and the next memory

location displayed. Entry of further switching times is also carried out as

described in point 4.3.

In addition, a complete switching command is stored automatically after

around 90 seconds provided no other key is pressed. The time switch then

enters the automatic operating mode and displays the current time again.

Deleting individual switching times

Press the "Prog" key repeatedly until the switching time you wish to delete

is shown in the display. Then set to "– –" using the "h" or "m" key and keep

the "

" key pressed down for around 3 seconds. The switching time is now

erased and the current time is displayed.

AM / PM time display

If you press the "+/-1h" and "h" keys at the same time, the time display

switches into the AM/PM mode (mostly used in English-speaking countries).

Technical data

Connection

Switching capacity

Ambient temperature

Running reserve

Memory Iocations

Shortest switching time

Programmable

see unit imprint

-10°C to +55°C

5 h at + 20°C

1 min.

every minute