Dini Argeo TPW20IEX2GD 안전 지침 - 페이지 11

{카테고리_이름} Dini Argeo TPW20IEX2GD에 대한 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dini Argeo TPW20IEX2GD 18 페이지.

DAILY MAINTENANCE

To keep the pallet truck scale in good operating condition, the operator must perform daily these checkpoints:

 Check overall conditions.

 Check weighing scale.

 Check printer ( if installed ).

 Check pump.

 Check rollers and wheels.

SCHEDULED MAINTENANCE (MAINTENANCE PERFORMED BY QUALIFIED PERSONNEL ONLY)

Please find below the programmed mainenance operations to be made by specialised personnel. Remember that before

starting the maintenanc one should place the cart on a flat surface.

 Make sure to put the pallet truck scale on a flat and solid surface.

 Check that nothing is blocking the rollers.

 Grease rollers and wheels bearings: the lubrication with lithium grease is foreseen for every 6 months.

 Grease control lever on rudder.

 Check oil every six months. Fill up if necessary with IP46 hydraulic oil.

N.B. If oil needs to be replaced, follow the necessary precaution and law requirements for the disposal of the

exhausted oil.

Replace rollers and wheels when necessary.

 The foreseen life of the bearings is the following:

- For applications with a single roller: 900 hours of use;

- For applications with double roller: 9000 hours of use;

Once reached this time period one should substitute these with bearing of the same model (SKF6204Z).

For any questions or problems check with an Authorised service Centre.

10. REFERENCE DRAWINGS

TPWX2GD/TPWX2GDI/TPW20IEX2GD

1150

120