Ariston GENUS PREMIUM EVO HP 45 사용자 설명서 - 페이지 10
{카테고리_이름} Ariston GENUS PREMIUM EVO HP 45에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston GENUS PREMIUM EVO HP 45 17 페이지. Wall-hung condensing
gas boiler hp
Ariston GENUS PREMIUM EVO HP 45에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지), 사용자 설명서 (32 페이지), 설계, 설치 및 서비스 지침 (44 페이지)
페이지 인쇄
用户手册
显示屏显示故障代码和故障描述.
"Fault 110 - Send Probe Damaged"
显示屏显示
ALERT
Call the technical service
水压不足导致的安全关闭
如果因为供暖系统循环水水压不足而导致的关闭，
锅炉将执行一个安全关闭。
显示屏显示" Fault 108 - Filling Needed".
ALERT
可以使用注水阀向系统内注水，当达到相应值时，系统可以启动。
如果系统压降非常频繁，请关闭锅炉，关闭燃气阀，并关闭外接
的电源，联系有资质的技术人员进行检查，寻找漏水点。
运行关闭
这种关闭的类型是"非易失错误", 意味着不会被自动解除。
显示屏将显示故障代码和故障描述。
可通过按面板上的复位键
显示屏显示 "Reset in progress"(复位进行中)
"Fault solved"（故障解除）
.
18
Fault 110
Send Probe Damaged
Fault 108
Filling Needed
来重启运行。
u
e s
s ' r
m
a
n
u
l a
conditions
The boiler is protected from malfunctions by means of internal
checks performed by the electronic P.C.B., which stops the boiler
in this manner, a code appears on the control panel display which
may occur:
This type of error is "volatile", which means that the boiler starts
up again automatically as soon as the problem which caused the
is removed. The display shows the code and the error
description.
"Fault 110 - Send Probe Damaged"
ALERT
Call the technical service
starts up again and continues to operate normally.
ed technician.
ciente pressione dell'acqua nel circuito
riscaldamento la caldaia segnala un arresto di sicurezza.
The display shows "Fault 108 - Filling Needed".
ALERT
The system may be restarted, re-balancing the value, by using the
lling valve.
If the re-balancing request is performed on a frequent basis, switch
, bring the external electric switch to the OFF position,
for any leaks of water.
Operation shutdown
This type of error is "non-volatile", which means that it is not
removed automatically.
The display shows the code and the error description.
To restore normal operation press the
panel.
The dispay shows "Reset in progress" and then "Fault solved".
If the problem manifests itself again after several attempts to reset
and the reason behind it.
Fault 110
Send Probe Damaged
disappears, the boiler
. Make sure
cient water pressure
Fault 108
Filling Needed
ed technician to check
button on the control
ed technician.
the gas