Aeotec ZWA042 매뉴얼 - 페이지 2

{카테고리_이름} Aeotec ZWA042에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec ZWA042 11 페이지. Outdoor smart plug

페이지 인쇄

Specifications

ITEM

Model

Power Supply

Signal(Frequency)

Range

Operating Temperature Range

Specifications subject to change without notice due to continuing product improvement

Website:www.aeotec.com/

Introduction

This product can be operated in any Z-Wave network with other Z-Wave Plus™ certified devices from other manufacturers.

All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. Each module is designed to act as a repeater,which will re-transmit a radio frequency (RF)

signal by routing the signal around obstacles and radio dead spots to ensure that the signal is received at its intended destination.

ZWA037-A is a security enabled Z-Wave Plus™ device. A security Enabled Z-Wave Plus™ Controller must be used in order to fully utilize the product.

Endpoint ROOT Type

GENERIC_TYPE: GENERIC_TYPE_SWITCH_BINARY(0x10)

SPECIFIC_TYPE: SPECIFIC_TYPE_NOT_USED(0x00)

APP ICON TYPE: ICON_TYPE_GENERIC_ON_OFF_POWER_SWITCH(0x0700)

Endpoint 1 Type

GENERIC_TYPE: GENERIC_TYPE_SWITCH_BINARY(0x10)

SPECIFIC_TYPE: SPECIFIC_TYPE_NOT_USED(0x00)

Endpoint 2 Type

GENERIC_TYPE: GENERIC_TYPE_SWITCH_MULTILEVEL(0x11)

SPECIFIC_TYPE: SPECIFIC_TYPE_COLOR_TUNABLE_MULTILEVEL(0x02)

Key Features

Remote ON/OFF control via the Z-Wave™ controller

Manual ON/OFF control

INFORMATION

ZWA042

AC 120V 60HZ

908.42MHz

Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave™ receiver module.

5-104° F (-10-40° C)

ZWA042 User Manual