Ariston microSYSTEM 28 RFFI 설치 지침 매뉴얼 - 페이지 30

{카테고리_이름} Ariston microSYSTEM 28 RFFI에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston microSYSTEM 28 RFFI 48 페이지. Microsystem
Ariston microSYSTEM 28 RFFI에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 설치 지침 매뉴얼 (24 페이지)

페이지 인쇄

3. Remove screw "H" (F

4. Gently slide the electrode downward (F

. 1.14

To replace, repeat the steps in reverse order, paying

particular attention to the following:

a - Centre the electrode in the positioning hole carefully,

otherwise the electrode may break;

b -Ensure that the left hand and right hand electrodes are

located the correct way round (facing each other), to

give the correct spark gap;

c - Check that the cables have been connected correctly;

d -Check that the rubber gasket covers the cable/ electrode

connection point completely.

. 1.14);

. 1.15).

1.3.4 Removing the main heat exchanger

1. Drain the boiler of water;

2. Release the overheat thermostat sensor "I" (F

3. Release the two connection nuts "J" connecting the

exchanger to the flow and return pipes (F

4. Remove the heat exchanger by sliding forward (F

1.18).

. 1.15

. 1.16);

. 1.17);

Fig. 1.16

. 1.17

. 1.18