Aeotec 7 Pro ZWA012 사용자 설명서 - 페이지 3

{카테고리_이름} Aeotec 7 Pro ZWA012에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec 7 Pro ZWA012 14 페이지. Door / window sensor

Aeotec Door/Windows Sensor 7 Pro User guide : Aeotec Help Desk

Quick Start

Pre-Installation of Door / Window Sensor 7 Pro.

Open the cover by pressing the clip on the side and pulling the cover upwards.

Insert a fresh 1 * 1/2 AA battery, but pay attention to the polarity

Install your Door / Window Sensor 7.

The sensor can be mounted either on the moving part or on the fixed part of a door or a window. Mounting can be

accomplished either using the tape by peeling off the protection foil or using two screws with the holes inside the battery

compartment. If the tilt detection on a window (only normal windows, no roof windows) shall be used the sensor device

must be placed on the moving part of the window and the magnet on the window frame. The sensor comes with two types

of magnets:

3 z 14

https://aeotec.freshdesk.com/support/solutions/articles/6000230465

23. 2. 2021, 19:15