Cal Flame FPT-1100 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Cal Flame FPT-1100에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cal Flame FPT-1100 20 페이지. And firepits

Installation and Assembly

Fire Pit Burner Installation

The log set, log grate and crushed lava rock are shipped together on applicable models.

Remove the log set and un-pack all components. The logs are fragile -- use care when handling.

Place the fire pit back down on its pedestal. Attach the

gas flex hose to the burner.

Note: If you want to convert the orifice from LP to NG,

this is location of the orifice. See next page for gas

converstion instructions.

Place the rocks around the burner.

Page 8

Turn the fire pit on its side. Connect the

piezoelectric starter and attach the flex hose

for the gas supply.

Set the burner in the center of the pit and place the ring

around it.

Arrange the log set on top.

2008 Fireplace and Firepit Owner's Manual

Applies to all fire pits.

LTR20081006, Rev. A