3Com 3C16075 설치 매뉴얼 - 페이지 11

{카테고리_이름} 3Com 3C16075에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 3C16075 12 페이지. Superstack 3 advanced rps type 3 power module

CAUTION: Do not attempt to use a 'Y' cable to power two separate

SuperStack 3 units. The equipment may not operate.

CAUTION: All DC cable screws must be tightened with a suitable

tool.

Technical Information

Mechanical

Weight

Size

Electrical - Maximum Current Available

+27.0 volts 12.5 A

Power Consumption

Typical Input Power: 395 W

Total continuous output: 325 W

If the LEDs on the SuperStack 3 Advanced RPS Chassis indicate a

problem refer to Table 2, which contains a list of problems and

possible faults.

If you have a problem that is not listed here and you cannot solve it,

please contact your local technical support representative.

Table 2 Problems indicated by LEDs

Problem

No Input LED ON

633 g (22 oz)

276 x 87 x 42 mm (10.8 x 3.4

x 1.6 in.)

Possible Fault

Mains power is not present.

AC power cord is incorrectly connected.

Power cord may be faulty.

LED failed. Contact your supplier.

Technical Information