Cal Power APT 7000 Series 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Cal Power APT 7000 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cal Power APT 7000 Series 8 페이지. Automated ac power sources
페이지 인쇄BACKPANELCONTROLS
1.
THERMAL FANS: Used to cool the instrument.
2.
REMOTE OUTPUT CONNECTOR: Provides output to monitor PASS, FAIL,
Test-In-Process via relay contact closures.
3.
SYNC OUTPUT CONNECTOR: Provides the capability to monitor a 5 VDC
output signal.
4.
USB/RS-232 INTERFACE CARD: Interface card used to control, program, and
capture data via a serial interface.
5.
FUSE RECEPTACLE: Fuse rating is 10 A at 250 V for the 7004 model and
15 A at 250 V for the 7008 & 7016 models. To change the fuse, unplug
the power (mains) cord and turn the fuse cap counter clockwise to remove fuse.
The fuse compartment will be exposed. Please replace the fuse with one of the
proper rating.
6.
INPUT POWER RECEPTACLE: Standard IEC 320 connector for connection to a
standard NEMA style line power (mains) cord.
7.
UNIVERSAL AC OUTPUT SOCKET: 300 VAC max voltage & 20 A max current.
Not available on the 7040 model.
8.
INPUT POWER RECEPTACLE: Line voltage input selection is set by the position of
the switch 115/230V.
9.
GROUND LUG: Additional ground connector to be used in conjunction with the
power cord ground.
(7004/7008 Back Panel)
2.