Ariston KT 6104 QD 사용자 지침서 - 페이지 10

{카테고리_이름} Ariston KT 6104 QD에 대한 사용자 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston KT 6104 QD 44 페이지. Ariston cooktop user manual

페이지 인쇄

Electrical connection

The electrical safety ot this appliance is guaranteed

only if the appliance is correctly earthed in

compliance with the standards of electrical safety.

The manufacturer can under no circumstances be

considered responsible for any damage that might occur

due to incorrect earthing of the appliance.

Important points

Your hob unit is supplied with a special Scholtès

connection cable.

If ever the cable is damaged, it should be replaced by an

authorised service engineer only.

Disconnect the appliance before any work is carried

out.

Fasten the appropriate standard plug for the load

indicated the rating plate to the chord. If the appliance

must be directly connected to the mains, a multipolar

switch must be installed between the appliance and the

mains. The multipolar switch must have a minimum of

3 mm of space between the contacts, be sized to the

load, and comply with current regulations (the switch

must not be able to disconnect the earth conductor).

The supply cord must be positioned so that no part of it

reaches a temperature of 50 °C higher than room tem-

perature. Before making the connection, make sure that:

•

the limiter valve and the residential wiring can support

the appliance load (see rating plate);

•

the mains system is properly earthed in compliance

with current regulations and provisions;

•

there is easy access to the socket or the multipolar

switch after the appliance is installed.

Electrical connection

NOIR

N 1

N 2

NOIR

N:Black, BR:Brown, BL:Blue

* Application of the simultaneity coefficient in compliance

with standard EN 335-2-6

Y-type connection in compliance with standard EN 335-2-6.

Technical specifications

Power suply - Voltage

Fuses - Section

AT-FR-BE-DE-GP-ES-IE-IL-IS-IT-

LU-RE-FI-GR-PT-SE-MA-NZ

GB-DK-NL

230 V - 1 + N ~ 50 Hz

Fuse 20 A*

(KT 7104 QO - Fuse 25 A *)

FR - BE - NO

230 V - 2 ~ 50 Hz

Fuse 20 A*

(KT 7104 QO - Fuse 25 A *)

AT-FR-BE-CH-DE-ES-IL-IS-IT-LU

PT-SE-MA-NZ-DK-NL

400 V - 2 + N ~ 50 Hz

Fuse 16 A*

(KT 7104 QO - Fuse 20 A *)

FR - BE -NO

230 V - 3 ~ 50 Hz

Fuse 20 A*

(KT 7104 QO - Fuse 20 A *)

230 V - 2 +2N ~ 50 Hz

Fuse 16 A*

(KT 7104 QO - Fuse 20 A *)

CY-MT-AU-KW

240 V - 1 + N ~ 50 Hz

Fuse 20 A*

(KT 7104 QO - Fuse 25 A *)

Detail of wiring

- Connect the 5 wires to your machine respecting the

colour of the wires and their connections.

Black

Blue

Brown

L1 L2

Two-phase wiring

Blue

Brown

Maximum Electrical Input:

KT 6004 Q

KT 6001 H

KT 6104 QD

KT 7104 QO

This appliance conforms with the following European

Economic Community directives:

73/23/EEC of 19/02/73 (Low Voltage) and subsequent

modifications;

89/336/EEC

Compatibility) and subsequent modifications;

93/68/EEC of 22/07/93 and subsequent modifications

Attention: If the cooktop is installed above a built-in oven,

the electrical connection for the cooktop must be

independent of that for the oven, both for safety reasons

and to facilitate the removal of the oven for maintenance,

repair, etc.

Green / Yellow

Black

Green / Yellow

Connect the two

black live wires

L1 and L2

Single-phase wiring

03/05/89

(Electromagnetic

6200W

6400W

6200W

7400W