Ariston KT 7104 QO 사용자 지침서 - 페이지 11

{카테고리_이름} Ariston KT 7104 QO에 대한 사용자 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston KT 7104 QO 44 페이지. Ariston cooktop user manual

페이지 인쇄

When the hob is plugged in for the first time, an audio

signal sounds after a few seconds. You can then turn on

the hob.

Power on

To turn on th power, hold your finger on the button

Heating zone controls

Each heating zone is controlled by one of the selection

buttons, whose design reflects the configuration of the

heating zones themselves

and by two power level buttons :

To turn on a heating zone and increase its power

level, select the desired heating zone. Then adjust the

power level, which is displayed in steps from 0 to 9.

To set a heating zone to maximum power

immediately , press briefly on the "-" button. The heating

zone is turned on at 100% power.

To accelerate the heating time of a heating zone, use

the "Booster" ; Adjust the power level of the heating

zone to its maximum (9).

Then press the "+" button. The Booster funtion is

activated when the number 9 is replaced by "A". Choose

the power level of the Booster (1 to 8).

The Booster stops automatically when the set

temperature is reached.

To turn off the heating zone , press on the "+" and "-"

buttons at the same time. The power level is immediately

set back to 0 and the heating zone is turned off.

or press the "-" button. The heating zone's power level

descends gradually until it is turned off.

To turn off the entire hob simultaneously , press the

button

; The entire hob is turned off.

Be sure to unlock the hob before turning it off.

4 residual heat indicator lights (C)

Even after a heating zone is turned off, its residual heat

indicator lights stays on to show that the corresponding

heating zone is still hot (temperature over 60°C). These

indicator lights warn you of the risk of injury by burning.

How to use the different controls

How to lock the controls

When the hob is on, it is possible to lock the controls so

that the settings cannot be changed inavertently (due to

cleaning, children playing, etc). Hold your finger over the

button

the indicator light next to the button goes on.

To modify the power level of stop cooking , all your

need to do is press the button

light goes off.

You must the reselect the desired heating zone to

reactivate the settings.

Safety features

If an object (pan, lid, etc) is left on the control zone for

more than 10 seconds or a button in the controls zone is

pressed for too long, an audio signal is triggered.

• To stop the audio signal, remove the object causing the

interruption. The hob is now turned off.

• To reactivate the controls, follow the procedure for turning

on the hob.

Models KT 6104 & 7104 only

Functioning of the double heating zones

Select the desired heating zone and press on the button

corresponding to the extension (concentric or oval) to set

the power level to its maximum.

To turn off the extension, just press the extension button

again.

How to programme the cooking time ,

It is possible to programme one heating zone (any of the

four) for a duration of up to 99 minutes.

After selecting the power level, programme the cooking

time as follows :

• Press on the programming button

• Set the desired time with the buttons

• Validate the programme by pressing a second time the

programming button.

The countdown starts immediately and continues until

the end of the programmed cooking time. An audio

signal indicates the end of the cooking time.

again, the indicator

8.8.